• 米兰官网AC Milan

    SOP – 2-step protein fractionation (Triton) from fly heads

    ALFONSO.M.PENA

    Published: 2024-04-01 DOI: 10.17504/protocols.io.81wgbz151gpk/v1
    AI 解读
    浏览 1386

    Abstract

    SOP – 2-step protein fractionation (Triton) from fly heads

    Steps

    Reagents Needed:

    1.

    Protease and Phosphatase Inhibitors (cOmplete 04 693 124 001, PhosphoSTOP 04 906 837 001)

    2.

    Triton X-100 (Millipore Sigma, Cat# T9284)

    3.

    NaF (Sigma-Aldrich, Cat# S7920)

    3.1.
    ABC
    Stock SolutionsFormulaStorage
    TBS20 mM Tris Base, 150mM NaCl, pH 7.64C
    10X PhosphoStop1ml of MilliQ; 1 tablet: PhosphoStop-20C
    10X cOmplete1ml of MilliQ; 1 tablet: cOmpleteMini-20C
    AB
    1% TritonX-100 (1mL)800uL TBS, 100uL 10X cOmplete, 100uL 10X PhosphoStop, 10ul TritonX-1001% TritonX-100 (1mL) 800uL TBS, 100uL 10X cOmplete, 100uL 10X PhosphoStop, 10ul TritonX-100 0.0008g NaF

    Working solutions (w/ PPIs)Make and use the day of the extraction, keep on ice

    Protocol

    4.

    Collect 20-40 fly heads via Snap Freeze method into a Biomasher tube and transfer tubes to CTRND on dry ice.

    5.

    Turn on Sorvall ultracentrifuge and set temperature to 4degC, place rotor inside and turn on vacuum to allow internal temperature to set.

    6.

    Add 50uL (2.5uL/fly head) of 1% TritonX-100 with PPI to heads in Biomasher II tube and homogenize for 1.5 min with a hand-held automatic homogenizer and Biomasher pestles.

    7.

    Briefly spin down in tabletop centrifuge to get the liquid to the bottom of the tube.

    8.

    Sonicate at 35% with 5 one-second pulses for tissue to break down/dissolve. Skip this step for ‘non-sonicated’ extractions.

    9.

    Clarify by centrifugation in a tabletop centrifuge (2,100g) for 15 seconds.

    10.

    Move entire liquid sample into ThermoScientific 1.5ml microtube WX und MX (Cat #314352H01) before centrifuging

    11.

    Centrifuge the supernatant at 100,000 g (29,900 rpm) for 30 min at 4°C using the chilled rotor.

    12.

    Remove and save Supernatant into new labeled collection Eppendorf (soluble fraction).

    13.

    Wash the pellet by adding 50uL of TritonX-100 with PPI and centrifuging at 100,000 g for 15 min at 4°C. Discard the supernatant.

    14.

    Resuspend pellet in 50ul (2.5ul/fly head) in TritonX-100 with PPI by sonication with 3 one-second pulses or until it is fully resuspended. Label and save (insoluble fraction)

    15.

    Perform BCA. If strapped on time, samples can wait to be quantified and stored at -80C.

    推荐阅读

    Nature Protocols
    Protocols IO
    Current Protocols
    扫码咨询